Electrodes, EasyCap, and Accessories
Gunjan Human Karigar offers a wide variety of electrodes and accessories. Because the
NeXus product series has active amplifiers built into the encoder, you will only
require our carbon coated electrode cables (with active shielding) for recording
electrophysiological signals. The EasyCap shown below offers an easy way to
record up to 32 channels of EEG with the NeXus-32. Sizes are from 36 to 62 cm.
The standard electrode configurations is the 10-20 system and supports up to 21
(uni-polar) EEG channels. Other configurations with more electrode positions can
be ordered at additional cost.
This is a special pregelled surface EMG with combined positive,
negative and ground electrodes at 20 mm distances. This
self-adhesive electrode is for one-time use only. Ag/AgCl based.
This is a pregelled surface EKG/EMG electrode with a good
price-performance ratio. This self-adhesive electrode is for
one-time use only. Ag/AgCl based. Strong adhesiveness. (not
Easy EEG cap for up
to 21 channels.
This is a high-quality and flexible EEG cap that uses the
special sintered ring-electrodes with carbon coating and active
shielding. Offers virtually (movement) artifact free EEG recording
with NeXus-32. Sizes from 36-62 cm. (in steps of 2 cm)
A set of 25 blunt
This set of 25 blunt needles is used for filling the EasyCap
electrodes with the electrode-gel. Needles can be reused several
times. Prepare the skin with NuPrep before applying the gel.
10-20 EEG Paste
This is the standard EEG-paste for use with the NeXus-10 EEG and
SCP electrodes. Prepare the skin with NuPrep and apply the 10-20
Paste on the skin and on the EEG Electrodes. Suitable for use with
normal EEG and slow cortical potentials.
(Vaginal) EMG sensor
This is a vaginal sensor for pelvic floor training with
NeXus-10. NeXus-10 is capable or recording and feeding back both
the raw EMG and the normal EMG amplitudes. This sensor is
restricted for use by a single person only. Require NX-MiniDin1
This cable is required when using the vaginal or rectal EMG
training sensor. It converts the mini-din plug on the sensor to a
single-EMG channel input on the NeXus-10. A ground connector is
This is a (spare) chin-belt to be used with the EasyCap EEG
electrode cap. It is required to keep the EasyCap in place during
This is a special pregelled surface EKG/EMG electrode with a
very good price-performance ratio. This self-adhesive electrode is
for one-time use only. Ag/AgCl based. Normal adhesiveness.
This is a reusable surface EEG/EMG electrode with a good
price-performance ratio. This Ag/AgCl electrode can be used with
10-20 paste (EEG) for up to 10 times.
Electrogel for the
Place the sintered ring electrodes on the EasyCap prepare the
skin with NuPrep of another preparation method. Then use the 10 ml
syringe with a blunt needle to fill each Ag/AgCl electrode with
this conductive gel.
A 10 ml syringe
This syringe is used to fill the sintered ring electrodes with
electrode-gel when they are mounted on the EasyCap. Requires the
blunt-needles to be ordered separately.
This abrasive skin preparation gel is used to prepare the skin
for recording electrophysiological signals like EEG. (can be used
for EMG and ECG as well). It reduces the electrode-impedance and
optimizes the contact between the skin and the electrode.
Rectal EMG training
This is a rectal sensor for EMG training with the NeXus-10.
NeXus-10 is capable or recording and feeding back both the raw EMG
and the normal EMG amplitudes. This sensor is restricted for use
by a single person only. Requires NX-MiniDin1.
This is an adaptor cable for those people that want to use their
NeXus-10 auxiliary sensors (BVP,RSP, Skin Temp. and SC) on the
NeXus-16 or NeXus-32 as well. Not required when you do not use
This is a (spare) set of finger electrodes for the NeXus-10, 16
and 32 skin conductance sensor. This electrode can be used
multiple times. Based on Ag/AgCl electrode materials.